| dc.description.abstract | The purpose of this thesis is design, simulate and fabricate a single stage LNA circuit using the transistor model of ATF55143 at frequency 1.8GHz. The design simulation process is using Advance Design System (ADS) 2009. A single stage LNA has successfully designed with forward gain greater than 10 dB, noise figure less than 2 dB at frequency 1.8 GHz and S11, S22 about -15dB. Also the designed LNA can work stably at a frequency 1.8 GHz. I will tune and optimization value of component. After that, I will check noise figure, voltage standing wave ratio and bandwidth. Then, the real LNA circuit will be fabricated for measuring the LNA’s characteristics.
Time schedule: 10 months
From 1/3 to 1/5: Searching and understanding the document of low noise amplifier at frequency 1.8GHz
From 1/5 to 1/7: Designing and simulating low noise amplifier at frequency 1.8GHz
From 1/7 to 1/9: Designing and simulating low noise amplifier at frequency 1.8GHz
From 1/9 to 31/12: Fabricating circuit LNA, testing, measuring the LNA’s characteristics and writing report | en_US |
